660 Ton Seyi Press with Feedline

You are here

Summary

SS Press - Under 800 Ton

Inventory #: 501270

Bed Size: 145.67 '' x 61.02''

Specifications

Contact TPI

Call +1 (734) 727-0605 or send us an email.

Inventory #: 501270

Bed Size: 145.67 '' x 61.02''

  1. Press General Specifications:
  • Model: SAG660(H)-5
  • Type of Drive System: Top central drive crank type
  • Number of Suspension Points: 2 Points
  • Capacity: 660 Tons
  • Slide Stroke: 12''
  • Slide Speed (Continuous): 20-40
  • Die Height on Top of Bolster: 30'' (Stroke down adjust up)
  • Die Height Adjustment: 10''
  • Slide Area: 145.67 '' x 61.02''
  • Bolster Area: 145.67.05 '' x 61.02''
  • Bolster Thickness: 9.84’’
  • Side Window Opening: 51.18’’ x 25.59''
  • Air Counter Balance Capacity: 15000 lbs (Max. upper die weight); Air Pressure: 100 psi
  • Main Motor: 125 HP x 4P (Variable speed motor)
  • Slide Adjust Motor: 7.5 HP x 6P
  • Automatic Lubrication Motor: 1 HP x 4P
  • Clutch Break Lub. Cooling: 1 HP x 4P
  • Power Source Voltage by Customer: 440V x 60 Hz
  • Floor Space Required (LR x FB): 215.35’’ x 141.73’’
  • Overall height (Above Floor Level): 274.96’’
  • Machine Height (Approximate): 140 US Tons

 

  1. Standard Attachments:
  • Air Counter Balancers: 2 Sets (Pressure adjust by manual and left front side of press)
  • Hydraulic Overload protector: 1 Set (Stroke: 20 mm; Pre-Set at 100-100% Press Capacity)
  • Digital Die Height Indicator: 1 Set (1 scale = 0.1 mm; Manual operation by button)
  • Programmable limit switch with remote Display: 1 set
    • Wintriss Smart Pac2
    • Spare limit switches for customer: 8 sets
    • Remote display installed at front right side of upright; programmable limit switch installed on main console
  • Product Counter (6 digits): 1 set
  • Batch Counter (6 Digits): 1 set
  • Misfeed Detect Socket: 2 sets
    • Normal close circuit
    • Voltage 110 V
    • Located on front right side of press
    • Control by each cam switch
  • Air Tool Outlet (3/8B): 1 Set
    • Located on front left side of press
  • Automatic lubrication system: 1 set
    • Components: Tank, gear pump & motor, filter, level gauge, TRABON ms lubrication divider valve with flow sensor, breather
    • Lubrication points: crank bearing, con-rod bearing, pinion, main gear counter balancers, slide gib, ball screw, slide adjust worm gear
  • Control System:
    • Wintriss Smart Pac 2+WPC with following functions:
    • ProCAM: 6 channels spare cam
    • Diepro PAC; 8 channel die monitor
    • Autoset PAC: 4 channel tonnage monitor
    • Clock display on the right column
    • Servo feeder interface
  • Wiring Color (SEYI Standard)
    • Power line: black
    • Control line: AC: Red, DC: blue
    • Ground line: Green with yellow strip
  • Clutch & Brake: 1 set
    • Combination Type: Wet type 
    • Operation System: Pneumatic
  • Dual Safety Valve for Clutch Brake: 1 Set
    • Brand: Ross
    • With E-P Monitor
  • Lockable emergency button: 6 sets
    • Located on each upright, portable T-Stand, Main console
  • Die Light Device: 2 sets
    • Located at left & right side upright window opening
    • Lamp: 110 V x 10 W
  • Safety fence: 1 set
    • Located on top crown
  • Ladder: 1 set
    • Located at left back of press with safety locking plug on top of crown
  • Portable T-Stand
    • Quantity: Standard 1 set (plug x 1 pc. And short plug x2 pcs)
    • Install location: Front right side or back right side of press
    • Function of button:
      • Dual run push button
      • Emergency push button
      • Top stop button
      • Reset Button
      • Continuous arming buttons
      • Slide Adjustment
  • Die Stick Release Device: 1 Set
    • Freeing stuck dies by selector switch on main console
  • Optional Attachments:
    • Flywheel Brake
    • Air actuate brake & Spring release
  • Main motor FWD REV Switch
  • Safety Die Block
    • Block Length: 13.7’’ x diameter 2.99’’
    • Located on front and back of right side of the press with safety locking
    • Quantity: 2
  • Anti-Vibration Mount
    • Brand: Unisorb
    • Model: PM201(9)8-M64(300)-TF311
    • Quantity: 4 Sets
  • Tonnage Curve & Energy Capacity Curve Available upon request
Feedline Specifications: 
Capacity: 20,000#
Material Width: 48''
Max Thickness: 0.100''
AT Width: 30''
Thickness: 0.80''
At Max Width: 48''
Uncoiler ID: 19.25''-24.75''
COil Car OD: 72''
7 Roll
Straightner
Thread Table
Servo Feed